Canon CLC5000 Service Manual page 116

d-2. Removing the Transfer Belt (method 2)
• After removing the transfer unit assem-
bly from the copier
1) Remove the transfer belt assembly.
2) Place the transfer belt assembly as
shown, and remove the two releasing
lever fixing screws [1] at the rear.
3) Thereafter, place the transfer belt as-
sembly as shown on the floor, remove
the screw [2], and detach the transfer
belt assembly inlet paper guide [3].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 2 NEW FUNCTIONS
[1]
[1]
F02-405-66
[2]
[3]
F02-405-67
2-77