Canon CLC5000 Service Manual page 710

<R-OPT (reader-related machine settings)>
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
*1
P-SIZE
Identifies the size of paper and transparency film of the copier.
Settings 0: AB-configuration
1: Inch-configuration
2: A-configuration
3: All
METAL *1
Determines whether to use or not metal mode in user mode.
Settings 0: Not available
1: Available (Standard: 0)
*1
CONTROL
Use it to enable copying, printing, and scanning in the absence of the fol-
lowing input:
Settings 0 to 44 (default: 0)
(Each digit may be between 0 and 4; if set to '0', conditional operation
is not enabled.)
Remarks Value of Each Digit and Enabled Operations
1st digit: operation settings when control key is turned off
2nd digit: operation setting when card is not inserted
3rd digit: operation setting when ID No. is not entered
COPYRIGHT © 2001 CANON INC.
<M> <S>
R-OPT
P-SIZE MANAGE
0
METAL
OHP-MODE
0
SMP-NUM
CONTROL
0
• control key inserted
• card inserted (with Control Card-IV/Card Reader-B1 connected)
• ID number entered (when pre-set)
Value of digit BW copy
0
1
2
3
°
4
°
2000 2000 2000 2000
<R>
READY
THIN-APS
0
0
0
0
F00-500-02
Color copy BW print
°
°
: enabled : disabled
°
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
<P> <F>
READY
Color print Scan
°
°
S-121