Canon CLC5000 Service Manual page 82

3) Check to make sure that the generated test print is free of image faults, and have it read
by the machine. (If it has an image fault, perform the Basic Image Adjustment Proce-
dure.)
• Using the image data collected by reading the test print output, the machine finds the
characteristics of the laser output and the image density (F02-403-07), and computes
a correction value for 400-line and 200-/266-line image data so that the ideal solid
density may be obtained.
Maximum (1.7)
0
COPYRIGHT © 2001 CANON INC.
Image characteristics by image data
Laser output
0
2000 2000 2000 2000
CHAPTER 2 NEW FUNCTIONS
Ideal gradation characteristics
25.5
F02-403-07
CANON CLC5000 REV.0 JAN. 2001
2-43