11.2.15 Scheduling Snapshots - Lenovo ThinkServer RD330 Software User's Manual

MegaRAID SAS Software User Guide

11.2.15 Scheduling Snapshots

2. In the Select Capacity field, use the drop-down selector to select the appropriate
capacity to use for changes to the base VD.
3. Click Next.
The Enable MegaRAID Recovery wizard - Create Snapshot Schedule wizard
appears as shown in Figure 219. This wizard lets you to schedule the snapshots.
You can select an existing snapshot schedule or create a new snapshot schedule for the
VD.
Follow these steps to schedule snapshots.
1. Select any one of the options shown in the Enable MegaRAID Recovery - Create
Snapshot Schedule wizard in
button.
Figure 219: Enable MegaRAID Recovery - Create Snapshot Schedule
 Add virtual drive to the existing schedule — This option allows you to add a VD to a
pre-existing schedule already defined in the system.
The Schedule field displays the schedule details of the VD.
— The Frequency column — Displays the frequency of the daily or weekly
snapshot schedule.
Chapter 11: Using MegaRAID® Advanced Software
Figure 219 to schedule snapshots using the radio
|
Recovery Advanced Software
Page 337