Lenovo ThinkServer RD330 Software User's Manual page 265

MegaRAID SAS Software User Guide
If there are no unconfigured drives available, you have the option to use free
capacity of an existing drive group, as shown in Figure 143. The Create Virtual
drive-Summary screen appears as shown in Figure 145.
If unconfigured drives are available,
Figure 143: Using the Free Capacity of an Existing Drive Group
3. Check the option Use Unconfigured drives (create new drive group) and press Next.
The Create Virtual Drive screen appears, as shown in Figure 144. If there are different
types of drives attached to the controller, such as HDD, SDD, SAS, and SATA, there is
an option to allow drive type mixing.
|
Chapter 8: Configuration Creating a New Storage Configuration
Figure 144 appears, and you can go to step 4.
Page 265