Disabling The Drive Security Settings - Lenovo ThinkServer RD330 Software User's Manual

MegaRAID SAS Software User Guide
4.7.6 Disabling the Drive Security
Settings
Chapter 4: WebBIOS Configuration Utility
Figure 79: Change Security Settings
3. Select the Change current security settings option, the Change Security
Settings – Security Key ID wizard is displayed (Figure 74). This procedure
continues till Figure 78.
4. Select the Switch to External Key Management (EKM) mode, and click OK, the
Authenticate Drive Security Settings screen is displayed (Figure 72).
Perform the following steps to disable the drive security settings.
NOTE: If you disable the drive security settings, you cannot create any new secure
virtual drives. Disabling these settings does not affect the security or data of foreign
drives. If you removed any drives that were previously secured, you will still need to
enter the security key when you import them.
1. Click Drive Security on the main WebBIOS screen.
The Drive Security screen appears, as shown in Figure 80.
|
Selecting SafeStore Encryption Services Security
Options
Page 123