Prerequisites For Installing Msm On Rhel6.0 X64 Operating System; Linux Error Messages; Kernel Upgrade - Lenovo ThinkServer RD330 Software User's Manual

Megaraid sas software user guide
Hide thumbs Also See for ThinkServer RD330:
Table of Contents

Advertisement

Chapter 6: MegaRAID Storage Manager Overview and Installation
Storage Manager
6.4.5
Prerequisites for Installing
MSM on RHEL6.0 x64 Operating System
6.4.6

Linux Error Messages

6.4.7

Kernel Upgrade

Page 234
|
Installing MegaRAID
Client Components Only - The storelib feature of the product are not installed in this
type of installation. As a result, the resident system can only administer and
configure all of the servers in the subnet, but it cannot serve as a server.
StandAlone - Only the networking feature is not installed in this case, so the
resident system is not a part of the network. This means the system cannot browse
any other MSM servers in the subnet, and the MSM servers cannot will recognize it
as a server.
This installation helps you select any of the setup types, but if you run RunRPM.sh, it
installs the complete feature.
Before installing MSM on RHEL6.0 x64 system, install the following rpms. Without these
files/RPM's MSM may not be install properly or may not work as expected.
1. libstdc++.so.6 -> libstdc++-xx.yy.i686.
2. libXext.so.6 -> libXext-1.1-2.el6.i686.rpm
3. libXtst.so.6 -> libXtst-1.0.99.2-3.el6.i686.rpm
These rpms are available as a part of RHEL6 OS DVD. These RPM's may need additional
dependent RPM's as well, and also all the dependent RPM's must be installed on the
target system.
The following messages can appear while you are installing MegaRAID Storage
Manager software on a Linux system:
More than one copy of MegaRAID Storage Manager software has been installed.
This message indicates that the user has installed more than one copy of MegaRAID
Storage Manager software. (This can be done by using the rpm-force command to
install the rpm file directly, which is not recommended, instead of using the
install.sh file.) In such cases, the user must uninstall all of the rpm files manually
before installing MegaRAID Storage Manager software with the procedure listed
previously.
The version is already installed.
This message indicates that the version of MegaRAID Storage Manager software
you are trying to install is already installed on the system.
The installed version is newer.
This message indicates that a version of MegaRAID Storage Manager software is
already installed on the system, and it is a newer version than the version you are
trying to install.
Exiting installation.
This is the message that appears when the installation is complete.
RPM installation failed.
This message indicates that the installation failed for some reason. Additional
message text explains the cause of the failure.
If you want to upgrade kernel in Linux, you have to restart the MSM Framework and
Services in the same order by typing the following commands.
MegaRAID SAS Software User Guide

Advertisement

Table of Contents
loading

Table of Contents