Change Security Settings - Ekm - Lenovo ThinkServer RD330 Software User's Manual
Megaraid sas software user guide
Hide thumbs
Also See for ThinkServer RD330:
- Safety information manual (288 pages) ,
- Benutzerhandbuch (212 pages) ,
- Guía del usuario (202 pages)
Table of Contents
Advertisement
Chapter 11: Using MegaRAID® Advanced Software
11.5.4
Change Security Settings - EKM
Page 360
|
SafeStore Encryption Services
Figure 245: Error Message when user enters wrong security key
When you select the Change Security Settings in the Change Security wizard as
shown in Figure 246, two options are offered to you.
If you select the first option, Change current security settings, you can traverse to the
EKM mode.
If you select the second option, Switch to Local Key Management (LKM) mode, you
can switch over to LKM mode.
Perform the following steps to configure the Change Security Settings wizard.
1. Select the Physical View tab in the left panel of the MegaRAID Storage Manager
window, and click a controller icon.
2. Choose any one of the following options to enable the Change Security Settings
wizard.
Select Go To >Controller>Change Security Settings in the main navigation bar
present in the top portion of the MSM screen.
Right-click the controller icon, and click Change Security Settings.
The Change Security Settings wizard appears as shown in the following figure.
Figure 246: Change Security Settings
When you select the Change current security settings option, a different EKM key for
the controller is generated.
MegaRAID SAS Software User Guide
Advertisement
Table of Contents
