Power-Save Mode - Lenovo ThinkServer RD330 Software User's Manual
Megaraid sas software user guide
Hide thumbs
Also See for ThinkServer RD330:
- Safety information manual (288 pages) ,
- Benutzerhandbuch (212 pages) ,
- Guía del usuario (202 pages)
Table of Contents
Advertisement
Chapter 4: WebBIOS Configuration Utility
4.13.1
Power-Save mode
Page 170
|
WebBIOS Dimmer Switch
9. Select the Configured drives check box to let the controller enable the Configured
drives to enter the Power-Save mode.
10. Click Next.
The following confirmation message page appears.
Figure 121: Power Save Settings Confirmation Message
If you do not specify the Power-Save settings in the Power Save settings screen as
shown in Figure 118, the following message appears.
Figure 122: Power-Save Settings Not Saved Message
You can select the drive standby time, and the Power-Save mode by selecting the Auto,
Max, Max without cache option.
1. Select the drive standby time using the drop-down selector.
2. Select the power save mode by using the radio button.
3. Click Finish.
MegaRAID SAS Software User Guide
Advertisement
Table of Contents
