Display Specified Controller Properties; Set Factory Defaults; Set Sas Address; Set Time And Date On Controller - Lenovo ThinkServer RD330 Software User's Manual

MegaRAID SAS Software User Guide
5.8.6 Display Specified Controller
Properties
Table 42: Display Specified Controller Properties
Convention
MegaCli –AdpGetProp CacheFlushInterval | RebuildRate | PatrolReadRate| BgiRate |
CCRate | ReconRate | SpinupDriveCount | SpinupDelay | CoercionMode |
PredFailPollInterval | ClusterEnable | BatWarnDsbl | EccBucketSize | EccBucketLeakRate
| EccBucketCount | AlarmDsply | AbortCCOnError |
CopyBackDsbl | LoadBalanceMode | SMARTCpyBkEnbl | SSDSMARTCpyBkEnbl |
MaintainPdFailHistoryEnbl | EnblSpinDownUnConfigDrvs | EnblSSDPatrolRead |
UseFDEOnlyEncrypt | WBSupport | AutoEnhancedImportDsbl | PrCorrectUncfgdAreas |
DsblSpinDownUnConfigDrvs | -aN|-a0,1,2|-aALL
Description Displays the properties on the selected controller(s).
EccBucketCount: Count of single-bit ECC errors currently in the bucket.
WBSupport: Enables support for the WriteBack option as the Write Policy.
DsblSpinDownUnConfigDrvs: Disable spindown of unconfigured drives.
See Table 41
5.8.7

Set Factory Defaults

5.8.8

Set SAS Address

5.8.9 Set Time and Date on
Controller
Use the command in the following table to display specified properties on the selected
controller(s).
for explanations of the other options.
NOTE: The tty log can be saved at the controller level.
Use the command in the following table to set the factory defaults on the selected
controller(s).
Table 43: Set Factory Defaults
Convention
Description
Use the command in the following table to set the SAS address on the selected
controller(s).
Table 44: Set SAS Address on Controller
Convention
Description
Use the command in the following table to set the time and date on the selected
controller(s).
Table 45: Set Time and Date on Controller
Convention
Description
Chapter 5: MegaRAID Command Tool
AutoDetectBackPlaneDsbl |
MegaCli -AdpFacDefSet -aN|-a0,1,2|-aALL
Sets the factory defaults on the selected controller(s).
MegaCli –AdpSetSASA str[0-64] -aN
Sets the controllers SAS address. This string must be a 64-digit hexadecimal
number.
MegaCli –AdpSetTime yyyymmdd HH:mm:ss
-aN|-a0,1,2|-aALL
Sets the time and date on the controller. This command uses a 24-hour
format.
For example, 7 p.m. displays as 19:00:00. The order of date and time is
reversible.
|
Controller Property-Related Options
NCQDsply |
Page 185