Display Bbu Capacity; Display Bbu Design Parameters - Lenovo ThinkServer RD330 Software User's Manual

Chapter 5: MegaRAID Command Tool
5.11.3

Display BBU Capacity

5.11.4 Display BBU Design
Parameters
Page 190
|
Battery Backup Unit-Related Properties
Use the command in the following table to display the BBU capacity for the selected
controller(s).
Table 55: Display BBU Capacity Information
Convention
Description
Use the command in the following table to display BBU design parameters for the
selected controller(s).
Table 56: Display BBU Design Parameters
Convention
Description
MegaCli -AdpBbuCmd -GetBbuCapacityInfo
–aN|-a0,1,2|-aALL
Displays BBU capacity information. The information displays in the following
format:
BBU Capacity Info for Adapter: x
Relative State of Charge: xx%
Absolute State of Charge: xx%
Remaining Capacity: xx mAh
Full Charge Capacity: xx mAh
Run Time to Empty: xxx Min
Average Time to Empty: xxx Min
Average Time to Full: xxx Min
Cycle Count: xx
Max Error: xx%
MegaCli -AdpBbuCmd -GetBbuDesignInfo
–aN|-a0,1,2|-aALL
Displays information about the BBU design parameters. The information
displays in the following formats:
BBU Design Info for Adapter: x
Date of Manufacture: mm/dd, yyyy
Design Capacity: xxx mAh
Design Voltage: mV
Serial Number: 0xhhhh
Pack Stat Configuration: 0xhhhh
Manufacture Name: XXXXXX(String)
Device Name: XXXXXX(String)
Device Chemistry: XXXXXX(String)
MegaRAID SAS Software User Guide