Lenovo ThinkServer RD330 Software User's Manual page 86

Chapter 4: WebBIOS Configuration Utility
Page 86
|
Creating a Storage Configuration
Figure 44:
10. Repeat step 4 through step 6 until you have selected all the drives you want for the
drive groups.
11. After you finish selecting drives for the drive groups, select each drive group and
then click Accept DG for each selection.
12. Click Next.
The Span Definition screen appears, as shown in Figure 45. This screen shows the
drive group holes that you can select to add to a span.
WebBIOS Drive Group Definition Screen
MegaRAID SAS Software User Guide