Lenovo ThinkServer RD330 Software User's Manual page 280
Megaraid sas software user guide
Hide thumbs
Also See for ThinkServer RD330:
- Safety information manual (288 pages) ,
- Benutzerhandbuch (212 pages) ,
- Guía del usuario (202 pages)
Table of Contents
Advertisement
|
Chapter 8: Configuration
Changing Power Settings
Page 280
Figure 159: Manage Power Save Settings screen
3. Select the Unconfigured Drives check box to let the controller enable the
unconfigured drives to enter the Power-Save mode.
4. Select the Hot spare Drives check box to let the controller enable the Hot spare
drives to enter the Power-Save mode.
5. Select the Configured Drives check box to let the controller enable the Configured
drives to enter the Power-Save mode.
6. Select the Drive standby time (Alt+d) using the drop-down selector from the Drive
standby time field.
NOTE: The Drive Standby time drop-down selector will be enabled only if any of the
check boxes above are checked. The drive standby time can be 30 mins, 1hr, 1.30 hrs,
2hrs through 24 hrs.
7. Select the Power-Save mode using the drop-down selector from the Select Power-
Save mode field. The mode can be Auto, Max or Max without cache.
NOTE: The Select Power-Save mode drop-down selector is enabled only if the
Configured drives check box is selected. The Max without cache mode option depends
on the firmware settings.
8. Click OK. The Power-Save settings are saved.
After you click OK, the following dialog box appears.
MegaRAID SAS Software User Guide
Advertisement
Table of Contents
