Activation Key - Lenovo ThinkServer RD330 Software User's Manual

MegaRAID SAS Software User Guide
11.2.3

Activation Key

NOTE: The Mode column appears only if the keyvault is present.
3. Click the Advanced Software License Management Portal link to obtain the license
authorization code and activation key.
If you click the Benefits of each MegaRAID Advanced Software link, you can access
http://www.lsi.com/channel/products/advanced_software. If you click the Tips on
activating MegaRAID Advanced Software link, you can access
www.lsi.com/channel/licensing.
Both the Safe ID field and the Serial Number field consists of a pre-defined value
generated by the controller. Alternatively, you can copy the value and paste it in the
text box for the applicable field.
4. Click Activate.
The Activate MegaRAID Advanced Software – Choose Method wizard appears as
shown in the following figure.
Figure 201: Activate MegaRAID Advanced Software – Choose Method
Perform the following steps to enter the Activation key.
1. Click the Advanced Software License Management Portal link to obtain a
License Authorization Code (LAC) and Activation Key.
2. Use any one of the following options to enter the activation key:
a. Select the Enter an Activation Key option, and enter the activation key in the
text box provided below the Activation Key field.
b. Select the Select an Activation Key file, and click Browse to get the path of the
activation Key file.
Chapter 11: Using MegaRAID® Advanced Software
|
Recovery Advanced Software
Page 323