Download Firmware To The Physical Devices - Lenovo ThinkServer RD330 Software User's Manual

MegaRAID SAS Software User Guide
5.15.15 Download Firmware to the
Physical Devices
Use the command in the following table to download firmware to the physical devices
connected to the selected controller(s).
Table 100: Download Firmware to the Physical Devices
Convention
MegaCli –PdFwDownload [offline] {[-SataBridge]
-PhysDrv[E0:S0,E1:S1....]}|{-EncdevId[devId1,devId2,
...]} -f <filename> –aN|-a0,1,2|-aAll
Description Flashes the firmware with the file specified at the command line. Firmware
files used to flash a physical device can be of any format. The CLI utility
assumes that you provide a valid firmware image and it flashes the same.
The physical device has to do error checking.
-SataBridge: Allows you to download the SATA Bridge firmware in online
mode.
-Physdrv[E0:S0]: Specifies the physical drive enclosure and the slots for
the drives. Flashes the firmware to only one PD.
-EncdevId[devId1,devId2,...]: Specifies the enclosure device ID.
See Section 5.16.1, Display Enclosure Information
information.
Chapter 5: MegaRAID Command Tool
for more enclosure
|
Drive-Related Options
Page 209