Changing The Drive Security Settings - Lenovo ThinkServer RD330 Software User's Manual

MegaRAID SAS Software User Guide
11.5.10 Changing the Drive Security
Settings
CAUTION: If you forget the security key, you will lose access to your data. Be sure
to record your security key. You might need to enter the security key to perform certain
operations.
Figure 255: Confirm Create Security Key Screen
10. Click the check box I recorded the security settings for future reference and then
click Yes to confirm that you want to enable drive security on this controller and
have recorded the security settings for future reference.
MSM enables drive security and returns you to the main menu.
Perform the following steps to change the encryption settings for the security key
identifier, security key, and password.
1. Select the Physical View tab in the left panel of the MegaRAID Storage Manager
main menu, and click a controller icon.
2. Select Go To>Controller>Change Drive Security.
The Change Security Settings – Introduction screen appears. This screen lists the
actions you can perform, which include editing the security key identifier, security
key, and the password.
3. Click Next.
The Change Security Settings - Security Key ID screen appears.
4. Keep the existing security key identifier or enter a new security key identifier.
NOTE: If you change the security key, we highly recommend that you change the
security key identifier. Otherwise, you cannot differentiate between the security keys.
5. Click Next.
Chapter 11: Using MegaRAID® Advanced Software
|
SafeStore Encryption Services
Page 367