MegaRAID SAS Software User Guide
Chapter 9: Monitoring System Events and Storage Devices
Figure 180: Alerts Notification Configuration Screen
You can select the Alert Settings tab to perform the following actions:
Select the methods for the delivery of alerts.
Change the severity level of events.
Save an .xml backup file of the entire alert configuration.
Load all of the values from a previously saved backup into the dialog to edit or send
to the monitor.
NOTE: When you load a saved backup file, all unsaved changes made in the current
session are lost.
You can select the Mail Server tab to perform the following actions:
Enter or edit the sender e-mail address.
Enter the SMTP server.
Require authentification of the e-mail server.
Save an .xml backup file of the entire alert configuration.
Load all of the values from a previously saved backup into the dialog to edit or send
to the monitor.
NOTE: When you load a saved backup file, all unsaved changes made in the current
session will be lost.
You can select the E-mail tab to perform the following actions:
Add new e-mail addresses for recipients of alert notifications.
|
Configuring Alert Notifications
Page 297