System Makes A Clicking Sound When Starting Windows Me And The System Is Docked To Selectadockiii; The Wheel Scroll Function On Some Usb Mice Does Not Work After Hot Docking; Some Usb Hubs Or Usb Devices Properties Show Green (?) Mark - Lenovo ThinkPad i Series 1200 Installation Manual

Models: ThinkPad 600X
When the System is docked and in Standby mode, it cannot receive an
Issue:
incoming fax.
Option 1: When expected to receive fax, resume from Standby
Resolution:
Option 2: Undock the system and put the system into Standby mode
while Resume on Ring is enabled in the Power Option
2.2 System makes a clicking sound when starting Windows Me and the system is
docked to SelectaDock III.
ThinkPad 600X
Models:
Issue: When the system is docked to SelectaDock III, the system makes a
continuous clicking sound when the system starts.
Windows Me or the audio driver problem.
Cause:
Resolution: None
2.3

The wheel scroll function on some USB mice does not work after hot docking.

Models: ThinkPad models 570, 570E, A20m, A20p, T20, and X20
Issue: When USB mouse with wheel screen function is attached to the
docking station, the scrolling wheel on the mouse does not work after
the system is hot docked. Other mouse function (moving, clicking)
correctly works.
This occurs the following hot dock configuration
Wheel scroll function will resume after a system reboot.
Resolution:
2.4

Some USB hubs or USB devices properties show green (?) mark

Models: All ThinkPad models
When the USB hub or USB device is attached to the system, a green
Issue:
question mark appears on it in the Device Manager.
Cause: By Windows Me design. The green question mark on the device
indicates that a compatible hardware ID was used to install the drivers
for the device. Windows is not able to find a better match in our
default searching paths
Ignore green question mark. The device works correctly without any
Resolution:
error.
a) Use Eject Hardware to Eject from docking station. Click
Start→ Eject Hardware
b) After successful Eject, Click Start → Settings → Control
Panel
c) Double-click Power Option icon.
d) Click "Suspend/Resume Options" tab
e) Check Resume on Incoming Call
f) Now the system should be ready to be in Standby mode and
Resume on incoming fax.
ThinkPad model 570/570E with ThinkPad Port Replicator with
Advanced EtherJet Feature
ThinkPad model A20 Series, T20, and X20 with ThinkPad Dock