Configuring Rspan - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Software configuration guide
Hide thumbs Also See for WS-SUP32-GE-3B - Supervisor Engine 32:
Table of Contents

Advertisement

Chapter 48
Configuring Local SPAN, RSPAN, and ERSPAN
When clearing monitor sessions, note the following information:
This example shows how to configure Fast Ethernet port 5/1 as a bidirectional source for session 1:
Router(config)# monitor session 1 source interface fastethernet 5/1
This example shows how to configure Fast Ethernet port 5/48 as the destination for SPAN session 1:
Router(config)# monitor session 1 destination interface fastethernet 5/48
For additional examples, see the

Configuring RSPAN

RSPAN uses a source session on one switch and a destination session on a different switch. These
sections describe how to configure RSPAN sessions:
Configuring RSPAN VLANs
To configure a VLAN as an RSPAN VLAN, perform this task:
Command
Step 1
Router# configure terminal
Step 2
Router(config)# vlan
vlan_ID{[-vlan_ID]|[,vlan_ID])
Step 3
Router(config-vlan)# remote-span
Router(config-vlan)# no remote-span
Step 4
Router(config-vlan)# end
OL-11439-03
The no monitor session number command entered with no other parameters clears
session session_number.
session_range is first_session_number-last_session_number.
In the no monitor session range command, do not enter spaces before or after the dash. If
Note
you enter multiple ranges, do not enter spaces before or after the commas.
Configuring RSPAN VLANs, page 48-13
Configuring RSPAN Source Sessions, page 48-14
Configuring RSPAN Destination Sessions, page 48-15
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
"Configuration Examples" section on page
Purpose
Enters global configuration mode.
Creates or modifies an Ethernet VLAN, a range of
Ethernet VLANs, or several Ethernet VLANs specified in
a comma-separated list (do not enter space characters).
Configures the VLAN as an RSPAN VLAN.
Clears the RSPAN VLAN configuration.
Updates the VLAN database and returns to privileged
EXEC mode.
Configuring Local SPAN, RSPAN, and ERSPAN
48-23.
48-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst supervisor engine 32 pisa

Table of Contents