Displaying Embedded Ciscoview Information; Software Features Supported In Hardware By The Pfc3B - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Chapter 1 Product Overview
The default password for accessing the switch web page is the enable-level password of the switch.
Note
For more information about web access to the switch, refer to "Using the Cisco Web Browser" in the
IOS Configuration Fundamentals Configuration Guide at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf005.html

Displaying Embedded CiscoView Information

To display the Embedded CiscoView information, enter the following EXEC commands:
Command
Router# show ciscoview package
Router# show ciscoview version

Software Features Supported in Hardware by the PFC3B

The PFC3B provides hardware support for these Cisco IOS software features:
•
•
OL-11439-03
Access Control Lists (ACLs) for Layer 3 ports and VLAN interfaces
– Permit and deny actions of input and output standard and extended ACLs
Flows that require ACL logging are processed in software on the PISA.
Note
Except on MPLS interfaces, reflexive ACL flows after the first packet in a session is processed
–
in software on the PISA
– Dynamic ACL flows
Idle timeout is processed in software on the PISA.
Note
For more information about PFC3B support for ACLs, see
ACL Support."
For complete information about configuring ACLs, refer to the Cisco IOS Security Configuration
Guide, Release 12.2, "Traffic Filtering and Firewalls," at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/scfacls.html
VLAN ACLs (VACLs)—To configure VACLs, see
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
Software Features Supported in Hardware by the PFC3B
Purpose
Displays information about the Embedded CiscoView files.
Displays the Embedded CiscoView version.
Chapter 31, "Understanding Cisco IOS
Chapter 32, "Configuring VLAN ACLs."
1-3