Configuring RPR Supervisor Engine Redundancy
This chapter describes how to configure supervisor engine redundancy using route processor redundancy
(RPR).
Note
•
•
This chapter consists of these sections:
•
•
•
•
•
Understanding RPR
These sections describe supervisor engine redundancy using RPR:
•
•
•
OL-11439-03
For complete syntax and usage information for the commands used in this chapter, refer to the
Catalyst Supervisor Engine 32 PISA Cisco IOS Command Reference, Release 12.2ZY, at this URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/cmdr
ef.html
For information about nonstop forwarding (NSF) with stateful switchover (SSO), see
"Configuring NSF with SSO Supervisor Engine Redundancy."
Understanding RPR, page 6-1
Supervisor Engine Redundancy Guidelines and Restrictions, page 6-3
Configuring Supervisor Engine Redundancy, page 6-4
Performing a Fast Software Upgrade, page 6-6
Copying Files to the Redundant Supervisor Engine, page 6-7
Supervisor Engine Redundancy Overview, page 6-2
RPR Operation, page 6-2
Supervisor Engine Configuration Synchronization, page 6-3
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
6
C H A P T E R
Chapter 5,
6-1