Configuring Pfc Qos Statistics Data Export; Understanding Pfc Qos Statistics Data Export - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Software configuration guide
Hide thumbs Also See for WS-SUP32-GE-3B - Supervisor Engine 32:
Table of Contents

Advertisement

Configuring PFC QoS Statistics Data Export

This chapter describes how to configure PFC QoS statistics data export on Catalyst 6500 series switches.
Note
For complete syntax and usage information for the commands used in this chapter, refer to the
Catalyst Supervisor Engine 32 PISA Cisco IOS Command Reference, Release 12.2ZY, at this URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/cmdref.h
tml
This chapter contains these sections:

Understanding PFC QoS Statistics Data Export

Note
The PFC QoS statistics data export feature generates per-LAN-port and per-aggregate policer utilization
information and forwards this information in UDP packets to traffic monitoring, planning, or accounting
applications. You can enable PFC QoS statistics data export on a per-LAN-port or on a per-aggregate
policer basis. The statistics data generated per port consists of counts of the input and output packets and
bytes. The aggregate policer statistics consist of counts of allowed packets and counts of packets
exceeding the policed rate.
The PFC QoS statistics data collection occurs periodically at a fixed interval, but you can configure the
interval at which the data is exported. PFC QoS statistics collection is enabled by default, and the data
export feature is disabled by default for all ports and all aggregate policers configured on the
Catalyst 6500 series switch.
OL-11439-03
Understanding PFC QoS Statistics Data Export, page 40-1
PFC QoS Statistics Data Export Default Configuration, page 40-2
Configuring PFC QoS Statistics Data Export, page 40-2
The PFC QoS statistics data export feature is completely separate from NetFlow Data Export and
does not interact with it.
The PFC QoS statistics data export feature supports the PFC QoS features described in
"Configuring PFC QoS,"
that are implemented in the port ASICs and the PFC3B.
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
40
C H A P T E R
Chapter 38,
40-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst supervisor engine 32 pisa

Table of Contents