Displaying The Nde Configuration - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Configuring NDE
Router(config)#
To display the status of the NDE flow filters, use the show mls nde command described in the
"Displaying the NDE Configuration" section on page

Displaying the NDE Configuration

To display the NDE configuration, perform this task:
Command
Router# show mls nde
This example shows how to display the NDE configuration:
Router# show mls nde
Netflow Data Export enabled
Exporting flows to
Exporting flows from 10.6.58.7 (57673)
Version: 7
Include Filter not configured
Exclude Filter not configured
Total Netflow Data Export Packets are:
Total Netflow Data Export Send Errors:
Netflow Aggregation Enabled
Router#
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
46-18
10.34.12.245 (9988)
508 packets, 0 no packets, 3985 records
IPWRITE_NO_FIB = 0
IPWRITE_ADJ_FAILED = 0
IPWRITE_PROCESS = 0
IPWRITE_ENQUEUE_FAILED = 0
IPWRITE_IPC_FAILED = 0
IPWRITE_OUTPUT_FAILED = 0
IPWRITE_MTU_FAILED = 0
IPWRITE_ENCAPFIX_FAILED = 0
46-18.
Purpose
Displays the NDE configuration.
10.34.12.245 (9999)
Chapter 46 Configuring NDE
OL-11439-03