Configuring NDE
This chapter describes how to configure NetFlow Data Export (NDE).
Note
For complete syntax and usage information for the commands used in this chapter, refer to these
publications:
•
•
•
This chapter contains the following sections:
•
•
•
Understanding NDE
These sections describe how NetFlow Data Export (NDE) works:
•
•
NDE Overview
NetFlow collects traffic statistics by monitoring packets that flow through the switch and storing the
statistics in the NetFlow table. For more information about NetFlow, see
NetFlow."
OL-11439-03
The Catalyst Supervisor Engine 32 PISA Cisco IOS Command Reference, Release 12.2ZY at
this URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/cmdr
ef.html
The Release 12.2 publications at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_installation_and_configuratio
n_guides_list.html
NetFlow version 9 is supported—See this document:
Cisco IOS NetFlow Configuration Guide.
Understanding NDE, page 46-1
NDE Configuration Guidelines and Restrictions, page 46-10
Configuring NDE, page 46-10
NDE Overview, page 46-1
NDE on the PISA, page 46-2
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
46
C H A P T E R
Chapter 47, "Configuring
46-1