Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual page 829

Chapter 51 Configuring Online Diagnostics
To display the diagnostic tests that are configured for a module, perform this task:
Command
show diagnostic content [module num]
This example shows how to display the online diagnostics that are configured on a module:
Router# show diagnostic content module 7
Module 7:
Diagnostics test suite attributes:
ID
==== ================================== ============ =================
10) TestBadBpdu ---------------------> M**D****I**
11) TestTrap ------------------------> M**D****I**
12) TestMatch -----------------------> M**D****I**
13) TestCapture ---------------------> M**D****I**
14) TestProtocolMatch ---------------> M**D****I**
15) TestChannel ---------------------> M**D****I**
16) TestFibDevices ------------------> M**N****I**
17) TestIPv4FibShortcut -------------> M**N****I**
18) TestL3Capture2 ------------------> M**N****I**
19) TestIPv6FibShortcut -------------> M**N****I**
20) TestMPLSFibShortcut -------------> M**N****I**
21) TestNATFibShortcut --------------> M**N****I**
22) TestAclPermit -------------------> M**N****I**
23) TestAclDeny ---------------------> M**D****I**
24) TestQoSTcam ---------------------> M**D****I**
25) TestL3VlanMet -------------------> M**N****I**
26) TestIngressSpan -----------------> M**N****I**
27) TestEgressSpan ------------------> M**N****I**
28) TestNetflowInlineRewrite --------> C*PD****I**
29) TestFabricSnakeForward ----------> M**N****I**
30) TestFabricSnakeBackward ---------> M**N****I**
31) TestFibTcamSSRAM ----------------> ***D****IR*
32) ScheduleSwitchover --------------> ***D****I**
OL-11439-03
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
R/* - Power-down line cards and need reset supervisor / NA
K/* - Require resetting the line card after the test has completed / NA
Test Name
1) TestScratchRegister -------------> ***N****A**
2) TestSPRPInbandPing --------------> ***N****A**
3) TestTransceiverIntegrity --------> **PD****I**
4) TestActiveToStandbyLoopback -----> M*PDS***I**
5) TestLoopback --------------------> M*PD****I**
6) TestNewLearn --------------------> M**N****I**
7) TestIndexLearn ------------------> M**N****I**
8) TestDontLearn -------------------> M**N****I**
9) TestConditionalLearn ------------> M**N****I**
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
Purpose
Displays the online diagnostics configured for a module.
Testing Interval
Attributes (day hh:mm:ss.ms)
000 00:00:30.00
000 00:00:15.00
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
not configured
Running Online Diagnostic Tests
51-7