Configuring Interfaces - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Configuring Interfaces

This chapter describes how to configure interfaces on the Catalyst 6500 series switches. This chapter
consists of these sections:
Understanding Interface Configuration, page 7-2
•
Using the Interface Command, page 7-2
•
Configuring a Range of Interfaces, page 7-4
•
Defining and Using Interface-Range Macros, page 7-5
•
Configuring Optional Interface Features, page 7-6
•
• Understanding Online Insertion and Removal, page 7-16
• Monitoring and Maintaining Interfaces, page 7-16
• Checking the Cable Status Using the TDR, page 7-19
For complete syntax and usage information for the commands used in this chapter, refer to these
Note
publications:
The Catalyst Supervisor Engine 32 PISA Cisco IOS Command Reference, Release 12.2ZY, at
•
this URL:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/cmdr
ef.html
• The Release 12.2 publications at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_installation_and_configuratio
n_guides_list.html
OL-11439-03
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
7
C H A P T E R
7-1