Monitoring Flex Links
Table 9-1
Flex Links Monitoring Command
Command
1
show interface [{type
number}] switchport backup
1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
9-4
slot/port} | {port-channel
Purpose
Displays the Flex Links backup interface configured for an
interface, or displays all Flex Links configured on the switch
and the state of each active and backup interface (up or
standby mode).
Chapter 9
Configuring Flex Links
OL-11439-03