Switchport General Ingress-Filtering Disable; Switchport General Acceptable-Frame-Type Tagged-Only - Dell PowerConnect 3524 Cli Reference Manual

Example
The following example configures the PVID for Ethernet port 1/e16, when the interface is in general
mode.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general pvid 234

switchport general ingress-filtering disable

The switchport general ingress-filtering disable Interface Configuration mode command disables port
ingress filtering. Use the no form of this command to return to the default configuration.
Syntax
• switchport general ingress-filtering disable
• no switchport general ingress-filtering disable
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example disables port ingress filtering on Ethernet port 1/e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general ingress-filtering disable

switchport general acceptable-frame-type tagged-only

The switchport general acceptable-frame-type tagged-only Interface Configuration mode command
discards untagged frames at ingress. Use the no form of this command to return to the default
configuration.
Syntax
• switchport general acceptable-frame-type tagged-only
• no switchport general acceptable-frame-type tagged-only
476
VLAN Commands