LLDP Commands
lldp enable (global)
The lldp enable Global Configuration mode command in enables Link Layer Discovery Protocol
(LLDP). Use the no form of this command to disable LLDP .
Syntax
•
lldp enable
•
no lldp enable
Default Configuration
The command is enabled.
Command Mode
Global Configuration mode.
User Guidelines
•
There are no guidelines for this command.
Example
The following example enables Link Layer Discovery Protocol (LLDP) .
console (config)# lldp enable
lldp enable (interface)
The lldp enable Interface Configuration mode command enables Link Layer Discovery Protocol
(LLDP) on an interface. Use the no form of this command to disable LLDP on an interface.
251
LLDP Commands