Vc (Vlan Configuration) Mode - Dell PowerConnect 3524 Cli Reference Manual

show rmon log
show rmon statistics
show sessions
show stack
show system
show system id
show users
show version
telnet
terminal datadump
terminal history
terminal history size
traceroute
traffic-shape

VC (VLAN Configuration) Mode

Command Group
bridge address
bridge multicast address
bridge multicast forbidden
address
bridge multicast forbidden
forward-all
bridge multicast forward-all
dot1x auth-not-req
ip igmp snooping (Interface)
ip igmp snooping host-time-out Configures the host-time-out.
ip igmp snooping leave-time-out Configures the leave-time-out.
ip igmp snooping mrouter
78
Command Modes
Displays the RMON logging table.
Displays RMON Ethernet Statistics.
Lists the open Telnet sessions.
Displays information about stack status.
Displays system information.
Displays the service id information.
Displays information about the active users.
Displays the system version information.
Sends ICMP echo request packets to another node on the network.
Enables dumping all output of a show command without prompting.
Enables the command history function for the current terminal session.
Configures the command history buffer size for the current
terminal session.
Discovers the routes that packets will actually take when traveling to
their destination.
Assigns CoS values to select one of the egress queues.
Description
Adds a static MAC-layer station source address to the bridge table.
Registers MAC-layer Multicast addresses to the bridge table, and adds
static ports to the group.
Forbids adding a specific Multicast address to specific ports.
Forbids a port from becoming a forward-all Multicast port.
Enables forwarding of all Multicast frames on a port.
Enables unauthorized users access to that VLAN.
Enables Internet Group Management Protocol (IGMP) snooping on a
specific VLAN.
Enables automatic learning of Multicast router ports.