Ic (Interface Configuration) Mode - Dell PowerConnect 3524 Cli Reference Manual

spanning-tree bpdu
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree mode
spanning-tree mst
configuration
spanning-tree mst max-hops
spanning-tree priority
spanning-tree pathcost
method
spanning-tree priority
stack master
tacacs-server host
tacacs-server key
tacacs-server source-ip
tacacs-server timeout
username
vlan database
wrr-queue cos-map

IC (Interface Configuration) Mode

Command Group
back-pressure
bridge multicast forbidden
forward-all
bridge multicast forward-all
bridge multicast unregistered
channel-group
68
Command Modes
Defines BPDU handling when Spanning Tree is disabled on an
interface.
Configures the Spanning Tree bridge forward time.
Configures the Spanning Tree bridge Hello Time.
Configures the Spanning Tree bridge maximum age.
Configures the Spanning Tree protocol.
Enables configuring an MST region by entering the Multiple
Spanning Tree (MST) mode.
Configures the number of hops in an MST region before the BDPU is
discarded and the port information is aged out.
Configures the device priority for the specified spanning-tree
instance.
Sets the default pathcost method.
Configures the Spanning Tree priority.
Forces selection of a stack master.
Specifies a TACACS+ host.
Sets the authentication encryption key used for all TACACS+
communications between the device and the TACACS+ daemon.
Specifies the source IP address that will be used for the
communication with TACACS+ servers.
Sets the timeout value.
Establishes a username-based authentication system.
Enters the VLAN database configuration mode.
Maps CoS values to a specific egress queue.
Description
Enables Back Pressure on a given interface.
Forbids a port from becoming a forward-all Multicast port.
Enables forwarding all Multicast frames on a port.
Configures the forwarding state of unregistered multicast addresses.
Associates a port with a Port-channel.