Example
The following example displays the switchport configuration for Ethernet port 1/e1.
Console# show interface switchport ethernet 1/e1
Port 1/e1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled, Uplink is 1/e9.
Port is member in:
Vlan
----
1
8
11
19
72
Static configuration:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
488
VLAN Commands
Name
-------
default
VLAN008
VLAN011
IPv6 VLAN
VLAN0072
Egress rule
Type
-----------
-------
untagged
System
tagged
Dynamic
tagged
Static
untagged
Static
untagged
Static