Address Table Commands - Dell PowerConnect 3524 Cli Reference Manual

deny (MAC)
service-acl
show access-lists
show interfaces access-
lists

Address Table Commands

Command Group
bridge address
bridge multicast filtering
bridge multicast address
bridge multicast
forbidden address
bridge multicast
unregistered
bridge multicast forward-
all
bridge multicast
forbidden forward-all
bridge aging-time
clear bridge
port security
port security mode
port security max
36
Command Groups
Denies traffic if the conditions defined in the deny
statement match
Sets the default ace action to permit or deny.
Applies an ACL to the input interface.
Displays ACLs defined on the device.
Description
Adds a static MAC-layer station source address to
the bridge table.
Enables filtering of Multicast addresses.
Registers MAC-layer Multicast addresses to the
bridge table, and adds static ports to the group.
Forbids adding a specific Multicast address to
specific ports.
Configures the forwarding state of unregistered
multicast addresses.
Enables forwarding all Multicast frames on a port.
Forbids a port from becoming a forward-all
Multicast port.
Sets the Address Table aging time.
Removes any learned entries from the forwarding
database.
Disables new address learning/forwarding on an
interface.
Configures the port security learning mode.
Configures the maximum number of addresses that
may be learned on the port while the port is in port
security mode.
MAC Access-List
Configuration
Interface
Configuration
Privileged EXEC
Privileged EXEC
Access Mode
Interface (VLAN)
Configuration
Global
Configuration
Interface (VLAN)
Configuration
Interface (VLAN)
Configuration
Interface
Configuration
Interface (VLAN)
Configuration
Interface (VLAN)
Configuration
Global
Configuration
Privileged EXEC
Interface
Configuration
Interface
Configuration
Interface
Configuration