sntp client poll timer
The sntp client poll timer Global Configuration mode command sets the polling time for the Simple
Network Time Protocol (SNTP) client. Use the no form of this command to return to default
configuration.
Syntax
•
sntp client poll timer seconds
•
no sntp client poll timer
•
seconds — Polling interval in seconds (Range: 60 - 86400)
Default Configuration
Polling interval is 1024 seconds.
Command Mode.
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client to 120
seconds.
Console(config)# sntp client poll timer 120
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command enables Simple Network Time
Protocol (SNTP) Broadcast clients. Use the no form of this command to disable SNTP Broadcast clients.
Syntax
•
sntp broadcast client enable
•
no sntp broadcast client enable
Default Configuration
The SNTP Broadcast client is disabled.
Command Mode
Global Configuration mode.
131
Clock