Dell PowerConnect 3524 Cli Reference Manual page 66

password-aging
passwords history
passwords history hold-time
passwords lockout
power inline traps enable
power inline usage-threshold
priority-queue out num-of-
queues
qos
qos map dscp-queue
qos trust (Global)
radius-server deadtime
radius-server host
radius-server key
radius-server retransmit
radius-server source-ip
radius-server source-ipv6
radius-server timeout
rmon alarm
rmon event
rmon table-size
rmon table-size
show cpu utilization
show users
snmp-server community
66
Command Modes
Sets the expiration time for passwords in the local database.
Sets the number of required password changes before a password in
the local database can be reused.
Sets the number of days a password is relevant for tracking its
password history.
Sets the number of failed login attempts before a user account is
locked.
Adds a description of the powered device type attached to the
interface.
Configures the administrative mode of the inline power on an
interface.
Enables the egress queues to be SP queues.
Enables Quality of Service (QoS) on the device and enters QoS basic
or advance mode.
Modifies the DSCP to CoS map.
Configure the system to "trust" state.
Improves RADIUS response times when servers are unavailable.
Specifies a RADIUS server host.
Sets the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon.
Specifies the number of times the software searches the list of
RADIUS server hosts.
Specifies the source IP address used for communication with
RADIUS servers.
Specifies the source IPv6 address used for the IPv6 communication
with RADIUS servers.
Sets the interval for which a device waits for a server host to reply.
Configures alarm conditions.
Configures a RMON event.
Configures the maximum RMON tables sizes.
Configures the maximum RMON tables sizes.
Enables measuring CPU utilization.
Changes the unit ID of a specific unit.
Sets up the community access string to permit access to SNMP
protocol.