Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode.
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the device.
Example
The following example configures the http port number to 100.
Console(config)# ip http port 100
ip http exec-timeout
The ip http exec-timeout global configuration command sets the interval the system waits for user input
before automatically logging off. Use the no form of this command to return to default.
Syntax
•
ip http exec-timeout minutes [seconds]
•
no ip http exec-timeout
Parameters
•
minutes — Integer that specifies the number of minutes. (Range: 0 - 65535)
•
seconds — Additional time intervals in seconds. (Range: 0 - 59)
Default Configuration
The default configuration is 10 minutes.
Command Mode
Global Configuration mode.
User Guidelines
•
This command also configures the exec-timeout for HTTPS in case the HTTPS timeout was not set.
To specify no timeout, enter the command ip https exec-timeout 0 0.
502
Web Server