show bootvar
The show bootvar Privileged EXEC mode command displays the active system image file that is loaded
by the device at startup.
Syntax
•
show bootvar [unit unit]
unit — Specifies the unit number.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the active system image file that is loaded by the device at startup.
Console# show bootvar
Image
1
2
"*" designates that the image was selected for the next boot
152
Configuration and Image Files
Filename
Version
image-1
1.0.0.1
image-2
1.0.0.2
Date
Status
Active*
Not active