Ip Igmp Snooping Mrouter - Dell PowerConnect 3524 Cli Reference Manual

Default Configuration
IGMP snooping is disabled.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
• IGMP snooping can only be enabled on static VLANs. It must not be enabled on Private VLANs or
their community VLANs.
Example
The following example enables IGMP snooping on VLAN 2.
Console(config)# interface vlan 2
Console(config-if)# ip igmp snooping

ip igmp snooping mrouter

The ip igmp snooping mrouter Interface Configuration (VLAN) mode command enables automatic
learning of Multicast router ports in the context of a specific VLAN. Use the no form of this command to
remove automatic learning of Multicast router ports.
Syntax
• ip igmp snooping mrouter learn-pim-dvmrp
• no ip igmp snooping mrouter learn-pim-dvmrp
Default Configuration
Automatic learning of Multicast router ports is enabled.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
• Multicast router ports can be configured statically using the bridge multicast forward-all Interface
Configuration (VLAN) mode command.
192
IGMP Snooping Commands