Dell PowerConnect 3524 Cli Reference Manual page 58

switchport trunk native
vlan
switchport general
allowed vlan
switchport general pvid
switchport general
ingress-filtering disable
switchport general
acceptable-frame-type
tagged-only
switchport forbidden
vlan
switchport mode
switchport customer
vlan
switchport protected
map protocol
protocols-group
switchport general map
protocols-group vlan
ip internal-usage-vlan
mac-to-vlan
show vlan mac-to-vlan
show vlan
show vlan protocols-
groups
show vlan internal
usage
show interfaces
switchport
58
Command Groups
Defines the port as a member of the specified VLAN,
and the VLAN ID is the "port default VLAN ID
(PVID)".
Adds or removes VLANs from a general port.
Configures the PVID when the interface is in general
mode.
Disables port ingress filtering.
Discards untagged frames at ingress.
Forbids adding specific VLANs to a port.
Configures the VLAN membership mode of a port
Set the port's VLAN when the interface is in customer
mode.
Overrides the FDB (Forwarding Database)decision,
and sends all the Unicast, Multicast and Broadcast
traffic to an uplink port.
Maps a protocol to a protocol group. Protocol groups
are used for protocol-based VLAN assignment.
Sets a protocol-based classification rule.
Reserves a VLAN as the internal usage VLAN of an
interface.
Adds MAC addresses to the MAC-to-VLAN database.
Displays the MAC-to-VLAN database.
Displays VLAN information.
Displays protocols-groups information.
Displays a list of VLANs used internally by the device.
Displays switchport configuration.
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
VLAN
Configuration
Interface
Configuration
Interface
Configuration
VLAN
configuration
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC