Configuration And Image Files Commands - Dell PowerConnect 3524 Cli Reference Manual

sntp broadcast client
enable
sntp anycast client enable
sntp client enable
sntp client enable
(Interface)
sntp unicast client enable
sntp unicast client poll
sntp server
show clock
show sntp configuration
show sntp status

Configuration and Image Files Commands

Command Group
copy
delete
delete startup-config
dir
more
rename
boot system
38
Command Groups
Enables the Simple Network Time Protocol
(SNTP) Broadcast clients.
Enables Anycast clients.
Enables the Simple Network Time Protocol
(SNTP) Broadcast and Anycast client on an
interface.
Enables the Simple Network Time Protocol
(SNTP) client on an interface.
Enables the device to use the Simple Network
Time Protocol (SNTP) to request and accept
Simple Network Time Protocol (SNTP) traffic
from servers.
Enables polling for the Simple Network Time
Protocol (SNTP) predefined Unicast clients.
Configures the device to use the Simple
Network Time Protocol (SNTP) to request and
accept Simple Network Time Protocol (SNTP)
traffic from a server.
Displays the time and date from the system
clock.
Shows the configuration of the Simple Network
Time Protocol (SNTP).
Shows the status of the Simple Network Time
Protocol (SNTP).
Description
Copies files from a source to a destination.
Deletes a file from a Flash memory device.
Deletes the startup-config file.
Displays a list of files on a flash file system.
Displays a file.
Renames a file.
Specifies the system image that the device loads at
startup.
Global Configuration
Global Configuration
Global Configuration
Interface
Configuration
Global Configuration
Global Configuration
Global Configuration
User EXEC
Privileged EXEC
Privileged EXEC
Access Mode
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC