Setting The Number Of Rings (Auto Fax Reception) - Kyocera KM-2030 Instruction Handbook Manual

Section 6 Various Settings and Registration in this Fax
Setting the Number of Rings
(Auto Fax Reception)
The number of times the fax will "ring" before an incoming call is
answered in the Auto Fax Reception mode can be set here to any
number between 1 - 15.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
Set original
1.Raise the cover plate and press the Configure key.
(Inch)
Set Fax:
End
Line Type
TTI
Set fax:
End
TTI
Print report
2. Use the cursor up or the cursor down key to select "# of Rings"
["Nr of rings"].
Set Fax:
Fax Forwarding:Off
Bulletin Board:Delete
# of Rings
Set fax:
Fax forwarding:Off
Bulletin board:Delete
Nr of rings
3. Press the Enter key.
# of Rings:
1Times
*2Times
3Times
Nr of rings:
1Times
*2Times
3Times
6-4
JUL-08-2001 12:00
(Inch)
08-JUL-2001 12:00
(Metric)
(Metric)
(Inch)
:Tone Dial
:Outside P.
(Metric)
:Outside p.
P P
(Inch)
: 2Times
(Metric)
: 2Times
(Inch)
(Metric)
4. Use the cursor up or the cursor down key to select the number of
"rings" before an incoming call is answered.
* The asterisk ( * ) in the message display indicates the current
setting.
# of Rings:
3Times
4Times
5Times
Nr of rings:
3Times
4Times
5Times
5. Press the Enter key. The setting for the number of rings in the
Auto Fax Reception mode is complete.
Set Fax:
Fax Forwarding:Off
Bulletin Board:Delete
# of Rings
Set fax:
Fax forwarding:Off
Bulletin board:Delete
Nr of rings
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
(Inch)
(Metric)
(Inch)
: 5Times
(Metric)
: 5Times