Kyocera KM-2030 Instruction Handbook Manual page 57

5. Use the cursor up or the cursor down key to select whether or not
you want to include a cover page with the transmission.
> If you want to include a 1-sided page as a cover sheet, select
"Yes". In this case, the fax will first transmit only the front side
of the first page of the documents PRIOR to transmitting the
2-sided documents.
> If you only want to transmit the 2-sided documents, select "No".
6. Press the Enter key.
Rotate back side image:
On
Off
Top binding:
On
Off
7. Use the cursor up or the cursor down key to select whether or not
you want the data for the rear side of the documents to be inverted
to match the orientation of the front side during transmission.
> If you set the documents as shown in the illustration immediately
below, select "On". The fax will then invert the image of the rear
side of each document in memory 180°.
<Scanning>
(Direction of document feed)
> If you set the documents as shown in the illustration below,
select "Off".
<Scanning>
(Direction of document feed)
8. Press the Enter key. The documents will be scanned into memory
and the transmission operation will begin automatically.
(Inch)
(Metric)
<Printout at the
destination fax>
<Printout at the
destination fax>
Section 2 Various Functions of this Fax
2-3