Modifying And Deleting Encryption Boxes - Kyocera KM-2030 Instruction Handbook Manual

Section 4 Other Features of this Fax
2. Scroll through the menu with the cursor up or the cursor down key
and select "Program encryption box" ["Encryp. code box regist."] .
Program:
Program Chain Dial
Program subadd.confi.box P P
Program encryption box
Program:
Program chain dial
Subaddress box register
Encryp. code box regist.
3. Press the Enter key.
4. Scroll through the menu with the cursor up or the cursor down key
and select an unregistered box.
Program encryption box:
End
#01
#02
Encryp. code box regist.:
End
#01
#02
5. Press the Enter key.
Box. No.:0000
Enter Box No.
Box nr:0000
Enter box nr
6. Enter the number that you want to use as the Encryption Box
number.
* Each Encryption Box number is a 4-digit number from "0000" to
"9999".
* If you want to reset the displayed number to "0000", simply press
the Stop/Clear key.
Box. No.:6764
Enter Box No.
Box nr:6764
Enter box nr
7. Press the Enter key.
Box. ID:
Enter Box ID
8. Enter the number that you want to use for the Encryption Box ID.
* If you register "0000" as the Encryption Box ID, it will not be
necessary to enter an ID when you print out documents from that
Encryption Box.
Box. ID:3446
Enter Box ID
9. Press the Enter key.
4-44
(Inch)
(Metric)
P P
(Inch)
0101
(Metric)
0101
(Inch)
(Metric)
(Inch)
(Metric)
10. Enter the 2-digit key ID-code (01 - 20) that corresponds to the
Encryption Key to be used for this Encryption Box.
Encryption Key ID:16
Enter 2-Digit Key ID
Encryption code:16
Enter 2-digit ID-code
11. Press the Enter key.
12. Use the cursor up or the cursor down key to select whether or
not you want documents received into this Encryption Box to be
automatically printed out.
Print on RX.:
On
Off
Print on RX:
On
Off
13. Press the Enter key.
> If you want to continue registering other Encryption Boxes,
return to step 4.
> If you are finished registering Encryption Boxes, press the
Reset key. The operation panel will return to the initial mode
settings.

(4) Modifying and Deleting Encryption Boxes

* You CANNOT modify a registered Encryption Box ID.
* You CANNOT delete an Encryption Box which still contains
received documents.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode
settings.
1. Perform steps 1 - 3 of "(3) Registering Encryption Boxes",
page 4-43.
Program encryption box:
End
#01 0101
#02 6764
Encryp. code box regist.:
End
#01 0101
#02 6764
2. Use the cursor up or the cursor down key to select the Encryption
Box you want to modify or delete.
Program encryption box:
End
#01 0101
#02 6764
Encryp. code box regist.:
End
#01 0101
#02 6764
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)