Reception - Kyocera KM-2030 Instruction Handbook Manual

Section 4 Other Features of this Fax
D.R.D. Reception (Inch version only)
This reception mode utilizes the Distinctive Ring Pattern service
available from some telephone companies.
With this service, you can use two or more telephone numbers
on a single telephone line. As each number is given a different
ring pattern, the fax machine is able to differentiate between
incoming calls. If one of these numbers is designated for this fax
machine, and the desired ring pattern is designated for that
number in advance, fax reception will be initiated automatically
whenever the machine detects the ring pattern distinctive to the
fax.
Preparation
* Refer to "Selecting the Reception Mode", page 6-10, and select the
D.R.D. Reception mode.
• Confirm that the Auto Rx. indicator is lit. If it is not lit, press the
TAD/Auto Rx. key until the Auto Rx. indicator lights.
1. When a call comes in, the telephone will ring.
* If the telephone receiver is picked up while the telephone is still
ringing, the fax will deal with the call in the same manner as a
standard Manual Fax Reception. Refer to "Manual Fax
Reception", page 2-20.
4-4
* D.R.D. reception is only possible if you subscribe to the
Distinctive Ring Pattern service provided by your telephone
company. Contact your telephone company for further
information on the Distinctive Ring Pattern service available.
* Using D.R.D. Reception to receive a telephone call is only
possible if a separately purchased telephone is connected to
this fax machine.
2. The fax machine will then ring using the ring pattern
predetermined with the telephone company.
> If the call is from a telephone...
The bell distinctive to the telephone will ring in the fax machine.
Pick up the telephone receiver and speak with the other party.
* At the end of the conversation, fax reception can be initiated
manually.
> If the call is from a fax...
The bell distinctive to the fax will ring in the fax machine and fax
reception will start automatically.