Kyocera KM-2030 Instruction Handbook Manual page 42

Section 1 Basic Use of this Fax
Entering an F-Code password
10 An F-Code password is used during F-Code Based
Communication. However, you do not have to enter an F-Code
password here if you have determined in advance with the
other party not to use one.
> If you want to register an F-Code password, it can be up to
20 digits in length and include any combination of the
numerals 0 - 9 and the symbols "
> If you DO NOT need to register an F-Code password,
proceed to step 11.
Press the Enter key.
11
Enter Destination Name
Entering the other party's name
12 Enter the name of the other party.
* The name of the other party can be up to 20 characters in
length. (Refer to "Entering Characters", page 1-30.)
M.K.W
Enter Destination Name
Press the Enter key.
13
TX Start Speed:
33600bps
14400bps
9600bps
Selecting the transmission speed
14 Use the cursor up or the cursor down key to select the desired
transmission speed.
* If communication errors occur frequently at "33600bps",
change the setting to "14400bps" or "9600bps".
However, in this case, transmission time will be increased.
TX Start Speed:
33600bps
14400bps
9600bps
> If you pressed the F-Code [SUBADDRESS] key in step 7,
proceed to step 21 on page 1-35.
15
> If you DID NOT press the F-Code [SUBADDRESS] key in
step 7, press the Enter key and proceed to step 16.
1-34
" and "#".
Designating the one-touch key for Encrypted
16
Transmission
Use the cursor up or the cursor down key to select whether or
not you want to designate this key for Encrypted Transmission.
Encryption:
On
Off
> If you want to designate this key for Encrypted
Transmission, select "On" and proceed to step 17.
> If you DO NOT want to designate this key for Encrypted
Transmission, select "Off" and proceed to step 21.
Press the Enter key.
17
Encryption Key ID:00
Enter 2-Digit Key ID
Encryption code:00
Enter 2-digit ID-code
Use the keypad to enter the 2-digit key ID-code (01 - 20) that
corresponds to the Encryption Key you want to use for this
18
one-touch key.
Encryption Key ID:15
Enter 2-Digit Key ID
Encryption code:15
Enter 2-digit ID-code
Press the Enter key.
19
Box. No.:0000
Enter Box No.
Box nr:0000
Enter box nr
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)