Printing Out An Abbreviated Dial List - Kyocera KM-2030 Instruction Handbook Manual

Section 1 Basic Use of this Fax
Use the keypad to enter the 2-digit abbreviated number under
3
which the desired fax number is registered.
v :New York
Enter Destination
v :New York
Enter destination
* The transmission operation will begin automatically; there is
no need to press the Start key.
* If an unregistered abbreviated number was entered, an error
message will appear in the message display and then the
operation panel will return to the initial mode settings.

(4) Printing Out an Abbreviated Dial List

Print out this list in order to check the fax numbers registered under
abbreviated numbers.
* If there are no abbreviated numbers registered in this fax,
an Abbreviated Dial List will not be printed out.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Checking the initial mode display
1
Check the message display to make sure that the operation
panel is in the initial mode for fax operation.
Set Document
Set original
Entering the "Print Report" mode
2
Raise the cover plate that is located over the one-touch keys
and press the Print Reports key.
The "Print Report" menu will appear in the message display.
(Inch)
Print Report:
Activity Report
Confirmation Report
User Setting List
1-42
(Inch)
1
Document:8 / x11
2
(Metric)
Document :A4
JUL-08-2001 12:00
(Inch)
08-JUL-2001 12:00
(Metric)
(Metric)
Use the cursor up or the cursor down key to select
3
"Speed Dial List" ["Speed-dial list"].
Print Report:
Subaddress box list
Encryption box list
Speed Dial List
Print report:
Subaddress box list
Encryption box list
Speed-dial list
Press the Enter key.
4
Print Speed Dial List:
Abbreviated Dial List
1-Touch Key List
Tel Directory List
Print speed-dial list:
Abbreviated dial list
One-touch key list
Telephone directory list
Make sure that "Abbreviated Dial List" is selected in the
5
message display and press the Enter key.
An Abbreviated Dial List will be printed out.
* The operation panel will return to the initial mode settings.
* If there are no abbreviated numbers registered in the fax,
an error message will appear in the message display and
then the operation panel will return to the initial mode
settings.
P P
(Inch)
P P
P P
(Metric)
P P
(Inch)
(Metric)