Setting The Document Size For Scanning From The Document Feeder - Kyocera KM-2030 Instruction Handbook Manual

Setting the Document Size for
Scanning from the Document Feeder
Select here whether documents that are set in the DF will be
scanned as 8 " x 11" [A4] or other such standard size paper, or as
1/2
long documents (in the direction of the paper feed).
* It is necessary to select "Standard size original". here when
transmitting both sides of duplex (2-sided) documents.
(Refer to "Duplex Transmission", page 2-2.)
* If you select "Long original" here, it will not be possible to have
documents rotated for transmission.
(Refer to "(9) Rotate & Transmit Function", page 1-18.)
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
Set original
1. Raise the cover plate and press the Configure key.
(Inch)
Set Fax:
End
Line Type
TTI
Set fax:
End
TTI
Print report
2. Use the cursor up or the cursor down key to select "Scan from ADF"
["DF scanning"].
Set Fax:
Dial Confirm
Set Volume
Scan from ADF :Std size
Set fax:
Confirm dial
Set volume
DF scanning
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select the desired
document size setting.
* The asterisk ( * ) in the message display indicates the current
setting.
Scan from ADF:
*Standard size original
Long original
DF scanning:
*Standard size original
Long original
JUL-08-2001 12:00
(Inch)
08-JUL-2001 12:00
(Metric)
(Metric)
(Inch)
:Tone Dial
:Outside P.
(Metric)
:Outside p.
P P
:On
(Inch)
P P
:On
(Metric)
P P
:Std. orig.
(Inch)
(Metric)
Section 6 Various Settings and Registration in this Fax
5. Press the Enter key. The setting for the document size is complete.
Set Fax:
Set fax:
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Dial Confirm :On
Set Volume
Scan from ADF :Long orig.
Confirm dial :On
Set volume
DF scanning :Long orig.
(Inch)
P P
(Metric)
P P
6-9