Kyocera KM-2030 Instruction Handbook Manual page 69

1. Raise the cover plate and press the Information key.
The "Communication information" menu will appear in the
message display.
(Inch)
Communication information:
Tx result on LCD
Rx result on LCD
Edit
Communication information:
TX result display
RX result display
Edit
2. Use the cursor up or the cursor down key to select "Edit".
Then press the Enter key.
Edit:
Print
Immediate TX
Program/Change
Edit:
Print
Immediate transmission
Program/Change
3. Use the cursor up or the cursor down key to select "Program/Change".
Then press the Enter key.
* If there are no communications that are using the timer currently
in memory, an error message will appear and then the message
display will return to the "Edit" menu.
Program/Change: List
Doc #
v :YDK
13:00
Program/Change: list
Doc. nr :005
v :YDK
13:00
Selecting the related communication
4. Use the cursor up or the cursor down key to select the document
number that corresponds to the communication you want to modify.
Program/Change: List
Doc #
v :CRC
18:30
Program/Change: List
Doc. nr :017
v :CRC
18:30
(Metric)
(Inch)
P P
(Metric)
P P
(Inch)
(Metric)
:005
(Inch)
P03
Broadcast
(Metric)
P03
Broadcast
:017
(Inch)
P05
Broadcast
(Metric)
P05
Broadcast
Section 2 Various Functions of this Fax
5. Press the Enter key. The items available for modification will
appear in the message display.
Program/Change Broadcast:
End
Broadcast List
TX Time
Changing the scheduled start time
6. If you want to change the scheduled start time, use the cursor up
or the cursor down key to select "TX Time".
Then press the Enter key.
* If you DO NOT want to change the start time, this step is not
necessary. Proceed to step 9.
TX Time:18:30
Enter TX Time
TX time:18:30
Enter transmission time
7. Use the keypad to enter the desired time for the communication to
begin.
* If you want to reset the displayed time to "00:00", simply press
the Stop/Clear key.
TX Time:20:00
Enter TX Time
TX time:20:00
Enter transmission time
8. Press the Enter key. The new time for the communication to begin
will be registered.
* If you are finished modifying the contents of the communication,
proceed to step 38 on page 2-18.
Program/Change Broadcast:
End
Broadcast List
TX Time
Adding fax numbers
9. Use the cursor up or the cursor down key to select "Broadcast List".
Then press the Enter key.
Broadcast List:
End
Add destination
Change/Delete
Broadcast list:
End
Add attention
Change/Delete
10. If you want to add fax numbers, use the cursor up or the cursor
down key to select "Add destination" ["Add attention"].
* If you DO NOT want to add fax numbers, this step is not
necessary. Proceed to step 19.
Broadcast List:
End
Add destination
Change/Delete
Broadcast list:
End
Add attention
Change/Delete
P P
:18:30
(Inch)
(Metric)
(Inch)
(Metric)
P P
:20:00
(Inch)
(Metric)
(Inch)
(Metric)
2-15