When The Document In Memory [Memory] Indicator Is Lit; Cautions Before Disconnecting The Power; If A Power Failure Report Is Printed Out; When An Error Occurs - Kyocera KM-2030 Instruction Handbook Manual

Section 3 Troubleshooting
When the Document in Memory
[MEMORY] Indicator is Lit...
During a fax communication that uses the memory, documents will
be entered into memory and, to indicate this, the Document in
Memory [MEMORY] indicator will light. The Document in Memory
[MEMORY] indicator will also light when documents are received
directly into memory (Memory Reception) because paper has run out
or a paper jam has occurred.
* The Document in Memory [MEMORY] indicator will flash while
documents are being scanned or are being received into memory.
(Inch)

(1) CAUTIONS before Disconnecting the Power

• As electricity is necessary to retain documents in memory,
BE SURE to check whether the Document in Memory [MEMORY]
indicator is lit or not BEFORE intentionally disconnecting power to
this machine. If there are documents in memory and the indicator
IS lit, print out all important documents from memory and then
make sure that the Document in Memory [MEMORY] indicator is
out BEFORE disconnecting the power.
* The Imaging Memory back-up function of this machine will protect
the contents of memory for up to 60 minutes even if, for any
reason, power to the fax is disconnected or lost. However,
depending on certain conditions in this machine, a portion of the
first data received may be lost. Ask the other party to retransmit
any documents for which data was lost.
• NEVER disconnect the power to this machine while the sound of
the internal motor can be heard. If power is disconnected while the
motor is running, there is a danger of damaging or contaminating
the inside of the machine.

(2) If a Power Failure Report is Printed Out...

If documents or other information contained in memory are lost
because power to the fax is disconnected or lost, a Power Failure
Report will be printed out once power is restored.
Refer to this report to find out what information was lost.
* If no data or information was lost, a Power Failure Report will not
be printed out.
3-2
(Metric)

When an Error Occurs...

In the event of trouble during a communication, the alarm will sound
and the Communication Error indicator will first flash and will then
light continuously. In the event of a paper jam or a mechanical error,
the alarm will sound and the Machine Error indicator will first light.
Refer to the message display for an explanation in regard to the error
and follow the necessary procedure to eliminate the trouble.
(Refer to "When One of These Message is Displayed...", page 3-3,
and "Troubleshooting Tables", page 3-5.)
* In order to delete the error indications, press the Stop/Clear key.
(Inch)
(Inch)
(Metric)
(Metric)