Turning 2 In 1 Reception On/Off - Kyocera KM-2030 Instruction Handbook Manual

Turning 2 in 1 Reception ON/OFF

If 2 in 1 reception is turned ON and two 5
received in a row during the same reception, those 2 pages will be
printed onto a single sheet of 11" x 8
accomplish 2 in 1 Reception, it is necessary to turn this function ON in
advance.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
Set original
1. Raise the cover plate and press the Configure key.
(Inch)
Set Fax:
End
Line Type
TTI
Set fax:
End
TTI
Print report
2. Use the cursor up or the cursor down key to select "2 in 1 RX"
["2-up RX"].
Set Fax:
RX Date/Time
PaperFeed Sel.:AutoSelect
2 in 1 RX
Set fax:
2-up RX
Management
Remote diagn. :Off
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select whether to turn
2 in 1 reception ON or OFF.
* The asterisk ( * ) in the message display indicates the current
setting.
2 in 1 RX:
On
*Off
Remote diagn.:
On
*Off
" x 8 " [A5] size pages are
1/2 1/2
" [A4] size paper. In order to
1/2
JUL-08-2001 12:00
(Inch)
08-JUL-2001 12:00
(Metric)
(Metric)
(Inch)
:Tone Dial
:Outside P.
(Metric)
:Outside p.
P P
:Off
(Inch)
:Off
:Off
(Metric)
:Off
(Inch)
(Metric)
Section 6 Various Settings and Registration in this Fax
5. Press the Enter key. The setting for 2 in 1 Reception is complete.
Set Fax:
Set fax:
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
RX Date/Time :Off
PaperFeed Sel.:AutoSelect
2 in 1 RX :On
2-up RX :Off
Management :Off
Remote diagn. :On
(Inch)
(Metric)
6-13